Put your 250 Hz filter in the 0.5 slot and put an Inrad 600 hz (#763) or an
Inrad 1000 Hz (#766) in the 1.8 slot. The insertion loss of a #763 or #766 is
about the same as the 1800 Hz SSB filter. I am using the #763 in the 1.8 slot
and it works great for weak signals in uncrowded conditions.
Doug, N0HH
> The Omni has space for 3 filters, the standard 2400 Hz SSB, a narrow 1800 Hz
> SSB, and 500 Hz CW. I would like to instead use the standard SSB, a 500 Hz
> CW and 250 Hz CW in these three sockets. Apparently need to equalize gain
> for the two CW filters.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|