Check the power connectors, both on the radio and power supply. They may be
making poor contact. Check the voltage out of supply.
John N1JM
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of TOM
Sent: Thursday, November 10, 2005 9:20 AM
To: TenTec@contesting.com
Subject: [TenTec] Sick Omni 6+
100% CW, here are the symptoms.
Display flickers, when it does I'm in trouble. These symptoms are very
intermittent.
*Outboard keyer does not key rig
*incoming sigs have a chirp
*sometimes no audio
*when the audio goes, the "S" meter doesn't work
Usually does the above from a cold start. Pushing and proding does nothing.
When the display gets dimmer everything works ok. When it gets brighter one
or all the above takes place....any help appreciated....Tom N4RS
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|