Hi Larry,
I have a NYE Viking MB-VA which I have had for years and works great,
however, for a very long time now, the meter readings have been totally
erroneous. Therefore, I don't use the NYE Viking meter readings for
anything. I have to rely on an external meter.
What possibly needs to be fixed in order to get the meter indications to
work properly as when the system was bought originally? I replaced the
battery and that did not fix the problem. Any ideas?
Thanks,
Jim
K4PV
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Larry DiGioia
Sent: Monday, November 28, 2005 10:09 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Comments on "Repairs"
Denton wrote:
I am having another revamped Johnson Matchbox tuner manufactured for
me for that antenna.
Both antennas are fed with 450 ohm (for now) twin lead.
Just FYI, the Nye Viking is the exact same tuner as the old Johnson -
(with even better quality components) - they bought the rights to it.
Found mine on EBay for $500. Can't say I like the metering, though...
--
Larry N8KU
w w w . l o n g w i r e . c o m
100% CW 100% HF
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec