TenTec
[Top] [All Lists]

Re: [TenTec] RAM CLEAR - no help, My first Orion II bug

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] RAM CLEAR - no help, My first Orion II bug
From: "Gary Harwell" <gharwell@cpros.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 31 Dec 2005 14:50:29 -0800
List-post: <mailto:tentec@contesting.com>
Shortly after I said that the ram clear fixed the problem, it did it again! 
Should have kept quiet. I was in screen color selection #3, had been using 
#4 for a week or so. Don't know if the color selection has anything to do 
with it or not.
----- Original Message ----- 
From: "Stephen M. Shearer" <wb3lgc@verizon.net>
To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>; 
<orion@contesting.com>
Cc: "TenTec DitsnBits" <ditsnbits@tentec.com>
Sent: Saturday, December 31, 2005 12:25 PM
Subject: [TenTec] RAM CLEAR - no help, My first Orion II bug


> Ram-Clear (or master reset) didn't solve the problem.  I still have 
> S-meter
> freeze and a dead scan after a few hours of receiving. Yes, power off-on
> clears the condition.  I did another ram-clear, no help.
>
> Note, this time I NOTICED something that may be useful to TT:
> The main AF control moves the LCD display bar, but the volume doesn't 
> change
> in my earphones.  The volume does change for the speaker (if I unplug the
> phones).  The sub AF does work the earphones and the sub RX does have the
> s-meter display working ok.
>
> 73, Steve
>
> -----Original Message-----
> From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
> On Behalf Of Stephen M. Shearer
> Sent: Friday, December 30, 2005 9:00 PM
> To: 'Discussion of Ten-Tec Equipment'
> Subject: [TenTec] RAM CLEAR ?? My first Orion II bug
>
> OK, the info I found:
> To Activate the RAM-CLEAR feature.
>
> 1) PRESS and HOLD the VFOB-LCK button while turning on the radio.
> 2) WAIT until the BATTERY FAILURE message appears on the screen.
> 3) Answer YES when 'Clear User Memories?' appears on the screen.
> 4) Answer YES when 'Reset Optional Filters?' appears on the screen.
> 5) When radio screen appears, turn radio OFF and back ON.
>
> BUT, 3) and 4) don't show (on the O2) is it different then the O1?
> Memories are clear so it must do it automatically?
>
> Now, I wait...
> 73, Steve
>
> -----Original Message-----
> From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
> On Behalf Of Toby Pennington
> Sent: Friday, December 30, 2005 8:26 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] [Orion] My first Orion II bug
>
> The Ram Clear is the most important thing to do.........give it a try!
>
>
> ----- Original Message ----- 
> From: "Stephen M. Shearer" <wb3lgc@verizon.net>
> To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
> Sent: Friday, December 30, 2005 8:19 PM
> Subject: Re: [TenTec] [Orion] My first Orion II bug
>
>
>> I did a master reset and I am still seeing the "bug".  I will try 
>> again...
>>
>> Now, all I can do is listen and wait...
>> 73, Steve
>>
>> -----Original Message-----
>> From: tentec-bounces@contesting.com 
>> [mailto:tentec-bounces@contesting.com]
>> On Behalf Of Toby Pennington
>> Sent: Friday, December 30, 2005 8:02 PM
>> To: Discussion of Ten-Tec Equipment
>> Subject: Re: [TenTec] [Orion] My first Orion II bug
>>
>> I suppose you guys have done a ram clear and master reset?  This cleared
> the
>> problem up for one BETA tester.
>>
>> ......
>>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> 


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>