TenTec
[Top] [All Lists]

[TenTec] RTTY on the Omni VI

To: tentec@contesting.com
Subject: [TenTec] RTTY on the Omni VI
From: Keith Bainbridge <vk6xh@arach.net.au>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 12 Jan 2006 20:43:23 +0800
List-post: <mailto:tentec@contesting.com>
Can anyone offer a bit of basic advice on rtty connections and operation 
with the Omni 6 please.
The limited amount of digital stuff I've played with over the past 25 
years has always been through rigblaster interfaces and I believe the 
Omni 6 has the right connections to do without one for rtty and other 
digital modes.
I note there is audio in , audio out and mark/space rca's on the back of 
the rig, but the info in the manual is somewhat lacking compared to the 
FT 920 and soundcard I was using at the last attempt.
I've used various programs including mixw2 and mmtty  amongst others, 
But a bit of guidance wouldn't go amiss.
I'm not a digi mode sort of operator, SSB is my first love ( sacrilege  
I hear most of you say ) but would love to have a play !!
I have an Omni VI opt3 and an Omni D series B
Replies off list would be fine.
Mni tnx
Keith VK6XH          vk6xh@amsat.org

-- 
Keith Bainbridge
VK6XH & VK6DXR
President,  Northern Corridor Radio Group.  ( VK6ANC )
Amsat NA #35338
Wireless Institute of Australia. #307254 

Former Calls include:
G6HHV, G0HEI, G1GHZ, VK6BRK, VK6DXC & VK6AHH

You're just jealous because the voices only talk to me !!


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>