TenTec
[Top] [All Lists]

Re: [TenTec] OMNI VI Plus, MMTTY, and FSK

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] OMNI VI Plus, MMTTY, and FSK
From: Ed <w3nr@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 25 Jan 2006 04:03:42 -0500
List-post: <mailto:tentec@contesting.com>
Jim wrote:
> Ed-
> 
> How do you get FSK to transmit without a PTT connection? I use MMTTY and 
> cannot get it to transmit without using a COM port for PTT.
> 
>                       Jim  N4AL


FSK requires only the TXD from a comport. In MTTY setup, under 
afc/atc/pll choose FSK, under the tx tab choose the comport used, and 
under the misc tab choose com-txd (fsk). A ptt connection is only needed 
for afsk, psk31, sstv and other soundcard programs. Select "fsk" from 
the mode selection on the Omni and that is about all you need to do, 
other than setting the pbt to 3 o'clock as per the manual.

Ed W3NR

PS No transitor type switching is needed, it is all done in the omni's 
fsk generator, again as per the manual and schematic.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>