Perhaps i will try this approach first and see how i like it
On 2/8/06, Barry LaZar <k3ndm@arrl.net> wrote:
>
> Doug,
> I found that I can run the digital modes without having to use a
> RigBlaster. I just feed audio into and out of my computer via the AUX
> connector on the back of the radio. It seems to work fine with no
> problems.
> PTT is also connected to the AUX connector from the computers serial port
> RTS. Tentec supplied a wired connector for this purpose with female RCA
> connectors for each of the connector pins. It was a mindless setup. Seems
> Tentec was proactive on this issue and planned for this.
>
> 73,
> Barry
> K3NDM
>
> -----Original Message-----
> From: tentec-bounces@contesting.com
> [mailto:tentec-bounces@contesting.com]On Behalf Of Doug Shock
> Sent: Wednesday, February 08, 2006 5:10 PM
> To: tentec@contesting.com
> Subject: [TenTec] Orion II and rigblaster pro
>
>
> The Orion II will be delivered tomorrow. I bought a rigblaster pro and
> will mate the two. Any suggestions or tips?
>
>
>
> Also, I read somewhere that the Heil Yaesu pigtail will work on the
> Orion II and my pro headset. Did I read this correctly?
>
>
>
>
>
> Thanks
>
> Doug / K0ZU
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|