I found W9GE'd paper very good for setting up Orion not OII
----- Original Message -----
From: "Bill Tippett" <btippett@alum.mit.edu>
To: <tentec@contesting.com>
Sent: Saturday, February 11, 2006 20:49
Subject: [TenTec] Ocean noise
> AA6VB wrote:
>
> >I have heard you need to reduce the gain but when you put both rigs
> side by side with no antenna the Orion has much more internal
> noise. I think it is just a fact of life.
>
> Guys, especially those of you new to Orion
> whether original or O2, please read this!
>
> 1. Orion's AGC will amplify internal noise if the
> threshold is set too low. Orion's digital AGC is
> different than what is in the MP or other rigs.
>
> 2. As previously stated, set AF Gain to mid-scale
> and adjust RF Gain down until the noise drops.
>
> 3. The exact setting will vary depending on
> how much gain your antenna has and what band you
> are on (atmospheric noise being higher on the low
> bands and lower on the high bands, so the RF Gain
> setting will be a lower number on the low bands).
>
> I wish I had a dollar for every time I've seen
> complaints about this! I'm now considering going
> into business buying Orions from people who still
> don't get it and reselling them with some simple
> instructions as above. :-)
>
> Orion's AGC is phenomenal, but please take time to
> understand how it works and how to set it up properly. More
> info below and in the manual.
>
> http://www.doug-smith.net/digitalagc.htm
>
> Anyone still want to argue that using the S-meter to
> set RF Gain (which includes AGC Threshold) is a bad idea?
>
> 73, Bill W4ZV
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|