TenTec
[Top] [All Lists]

Re: [TenTec] Just did some testing with ALC

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Just did some testing with ALC
From: "Chortek, Robert L" <robert.chortek@berliner.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 2 Mar 2006 18:18:12 -0800
List-post: <mailto:tentec@contesting.com>
Try adj the txeq.  It made a big diff for me....

 -----Original Message-----
From:   Kc9cdt@aol.com [mailto:Kc9cdt@aol.com]
Sent:   Thu Mar 02 18:15:14 2006
To:     tentec@contesting.com
Subject:        [TenTec] Just did some testing with ALC

OK, I just went to the radio room, did a master reset on OII, Reset all the 
menu items, and tested the radio.

With the mic gain at 100, SP 5 (or higher) NO ALC light ever even flickers. 
At that time I am putting out full 100 watts (whistle in the Mic). I am even 
yelling in the Mic, no ALC light.

Does anyone else have this situation?


Also, I tried the monitor. using the headphones Had to turn it up to 90 to 
really hear myself well (why). At a Mic setting of 15-20 (suggested by someone) 
I can't even hear myself. When I turn the Mic gain to 65 (the setting I used 
to use with OI) I hear pretty good. Bottem line is the audio in Mon function is 
not loud enough to really hear well enough to adjust anything very well. 

What think folks?

Many Thanks for the help.
73,
Lee
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>