TenTec
[Top] [All Lists]

Re: [TenTec] O2 Tx Audio

To: on of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] O2 Tx Audio
From: "Scott Harwood" <scotth@hsc.edu>
Reply-to: scotth@hsc.edu,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 3 Mar 2006 07:40:55 -0500
List-post: <mailto:tentec@contesting.com>
I have received nothing but compliments on my tx audio using Orion II and 
Studio One mike.  As with almost everything else with the Orion II, it takes 
some study and care setting it up.  I plugged a cassette recorder into the 
monitor output and went through numerous settings of TxEQ, Low Freq Cutoff and 
Speech Processing stating into the microphone what each setting was while 
transmitting into a dummy load.  I then played the recorder back through my 
home stereo with no sound (base or treble) enhancement and selected the one 
that sounded the most natural for those 75 meter rag chews, the most piercing 
and penetrating for dx pileups, etc.  I got the XYL to also verify the 
?natural? sound.  

Just a suggestion on what worked for me.

73 all

Scott K4VWK

---------- Original Message ----------------------------------
From: "Ron Castro" <ronc@sonic.net>
Reply-To: Ron Castro <ronc@sonic.net>,Discussion of Ten-Tec Equipment 
<tentec@contesting.com>
Date:  Thu, 2 Mar 2006 19:45:12 -0800

>Maybe they need to bring Doug Smith, KF6DX back for a consult.
>
>Ron Castro
>Chief Technical Officer
>Results Radio, LLC
>
>
>----- Original Message ----- 
>From: <Kc9cdt@aol.com>
>To: <tentec@contesting.com>
>Sent: Thursday, March 02, 2006 6:47 PM
>Subject: Re: [TenTec] O2 Tx Audio
>
>
>> Well, that's unfortunate, as I think they did a superb job in early 
>> testing.
>> Really taking the place of a department for TT.
>>
>> Now TT is going to have to do a lot better on there own in QC and 
>> regression
>> test and analysis. So far not so good IMHO.
>>
>> I'm still rooting for them, but ?????
>> Maybe they need additional help with the programming (outside help)?
>>
>> Seems like more people are happier with the version 2 for Orion than OII
>> right now.
>> You would think the code (logic) would be the same with the exeption of
>> drivers for the screen and maybe some differences in the filter chain.
>>
>> I vote for going back to 1.xxx  for OII and improving from there... I 
>> know...
>> too late!
>> Lee
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>> 
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
 


                   

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>