Re: [TenTec] RF Getting back into Rig Problem

["G" <goofyham@highstream.net>]

I had a problem with my O1 & O2 with the TT 706 mic. Key stuck and RF in the 
audio. I found that when I pointed the beam right over the shack the 
problems started. I was able to eliminate almost all the problems by taking 
the 706 mic apart and using kitchen foil placing it around the little PC 
board pre amp and leaving a tab to put under one of the bottoming mounting 
screws, that grounded the foil. I first put black tape on the board to 
insulate it from the foil. Yes, the shack is grounded to a common 2, 8 foot 
ground rods 5 feet apart.
I also found last year when I had the key stuck problem it turned out to be 
the PTT button switch. It was bad. Had to bang on it to get back to receive.
My 2 cents.
George