TenTec
[Top] [All Lists]

Re: [TenTec] Binaural CW experiment No. 2

To: GARY HUBER <glhuber@msn.com>
Subject: Re: [TenTec] Binaural CW experiment No. 2
From: Jerry Volpe <kg6tt@arrl.net>
Reply-to: kg6tt@arrl.net,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 09 Apr 2006 11:00:18 -0700
List-post: <mailto:tentec@contesting.com>
Great to see another approach! I haven't used the AOR DSP filter yet and
I am going to look into it. I have tried the TimeWave DSP-599zx DSP
filter which also has a binaural CW mode and found the DSP latency of
that DSP filter (despite its high cost) a real issue with anything more
than like 15-wpm QSK operation which is why I have chosen thus far to
use discrete filters rather than emultated ones. What goes in comes
out.... now..... not later.

73,
Jerry, KG6TT

GARY HUBER wrote:
> Binaural CW can also be done with AOR model TDF-370 DSP Filter using
> "stereo mode" with stereo headset.
> Set Bandpass width (100, 200, or 300 Hz) and bandpass center freq (450
> - 800 HZ) and the CF selected is in "center of head" when tuned
> properly.... comes in one ear and out the other as tuned across the
> desired signal CF.... AOR TDF-370 makes a great adjunct to any Omni VI
> or Corsair II using wider IF filtering.
>  
> Best regards,
> Gary - AB9M

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>