This year I took Pegs (KB9LIE) Jupiter on vacation. It has the latest update
firmware.
When I pushed NR to see if I could get rid of some of the atmospheric noise,
I lost all receive audio. I tried this several times thinking that maybe I
was not tuned right on freq to the station calling. Disengage NR and
everything is OK again.
Has anyone else had this problem? Am I doing something wrong?
Otherwise the rig worked great. The new firmware with the narrower filter
selection was much better than previous selection which I think was 300hz in
the narrowest position. With the filter selection below 300hz, much of the
noise dissapeared.
I took the cooling fan from my Omni VI+ to put on it and the heat sink never
felt a bit warm.
We also worked some of the list members. THANKS!
73 Paul K9OT
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.10.8/413 - Release Date: 8/8/06
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|