TenTec
[Top] [All Lists]

Re: [TenTec] [Orion] Orion II and headphone audio ?

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] [Orion] Orion II and headphone audio ?
From: "Barry Gross" <barry.n1eu@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 21 Aug 2006 08:22:31 -0400
List-post: <mailto:tentec@contesting.com>
Turn your af gain to 50% and set the rf gain to where you just can
hear the band noise.

73,
Barry N1EU

On 8/20/06, dbp@tds.net <dbp@tds.net> wrote:
> Hi-
>  I have an Orion II which is used on CW and puts out good sounding audio into 
> the speaker; but when I use any of 3 stereo headphones that had worked fine 
> on my original Orion, the audio is now distorted. Bandwidth is not a factor. 
> If I reduce the RF gain to 70 it is not distorted. It does not seem to make 
> any difference at what pitch I am copying CW. I have tried a couple of system 
> resets while retaining memories, and also not saving memories. Any ideas?
>
> 73 de dave in NH
>
>
> _______________________________________________
> Orion mailing list
> Orion@contesting.com
> http://lists.contesting.com/mailman/listinfo/orion
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>