Jerry --
Here's your answer!
GL + 73,
Eric W3DQ
Washington, DC
-----------------
From: "Tom Althoff" <althoff@verizon.net>
To: "Eric Rosenberg" <wd3q@starpower.net>
Subject: Re: Your Orion Encoder Mods
Hi Eric -
I did not document what I did at the time but generally you cut the
traces to all keys except the 5 and the 0.
From top to bottom crosswire top row to bottom row, 2nd row left button
with 2nd row right button, and bottom row (E-0-.) left button with
bottom row right button.
Then you take a small screwdriver and carefully pry off the caps of the
buttons to arrange them as:
1 2 3
4 5 6
7 8 9
E 0 .
I'm convinced that Ten-Tec cut engineering costs by purchasing off the
shelf computer components for the remote pod, power supply and
auto-antenna tuner
instead of designing them themselves.
Good luck...not much you can do to break the pod.
73 de Tom K2TA
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|