I've found such at hobby shops such as sell radio controlled model
airplanes.
73, Mike N4NT
----- Original Message -----
From: "JT Croteau" <jt.w6fo@gmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, October 21, 2006 4:03 PM
Subject: [TenTec] Argosy Allen Wrenches
| In my efforts to fix the dial indicator on my Argosy 525, I am having
| a real hard time finding the right size allen wrenches for the smaller
| set screws on the front panel knobs. I've found the proper size at
| Home Depot for the larger of the set screws.. the band and mode switch
| knobs. However, the smallest Allen at Home Depot/Lowes are too big
| for the remaining knobs. The Argosy originally came with the two
| Allen's required but weren't passed down from owner to owner by the
| time I finally acquired mine.
|
| Any ideas?
|
| Thanks
|
| --
| <>< JT Croteau - W6FO - Canton, GA
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|