TenTec
[Top] [All Lists]

Re: [TenTec] PSU needed

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] PSU needed
From: VE1BN <ve1bn@eastlink.ca>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 14 Feb 2007 13:47:51 -0400
List-post: <mailto:tentec@contesting.com>
Alex -

I have a spare TenTec #961 power supply.

Unfortunately to ship it to Poland would be very expensive.  It weighs 
approximately 6.6 kg but packed in a safe wooden crate would weigh about 
9-10 kg or so.

Just information to let you know the obstacles.  The TenTec #963 is much 
lighter in weight, about 2 Kg and will easily power your rig.  I would 
suggest one of these.  Order one from TenTec.  Quite a small, inexpensive, 
RF noise-free 25 Ampere power supply. Also fully protected as the #961 and 
#962 supplies are. Check TenTec on the Internet for a photo and info.

Hope this info is of some use to you, Alex.

73,

Don,  ve1bn@eastlink.ca 
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>