Hey Jim,
That's what I intend to do, but was wondering if someone could shed some
light. I have been on-line reading application notes. No revelations so
far...
73,
Bernie
In a message dated 4/5/2007 5:18:34 P.M. Central Daylight Time,
dufferjames@hotmail.com writes:
Hey Bernie,
While it seems like there would be no polarity issues, why not just connect
the line side to line and the other side to load to prevent any doudt.
Jim, wd4air
>From: <K5XS@aol.com>
>To: <tentec@contesting.com>
>Sent: Thursday, April 05, 2007 5:38 PM
>Subject: [TenTec] Airpax Polarity?
>
>
> > At the minimal cost, I decided to add an Airpax T11-1-20.0A-01-11C-V in
>my
> > power supply circuit for my Orion II.
> >
> > I got the breaker (I got three, if anyone wants one at what I paid, let
>me
> > know) today, and looking at it, I see what appears to be an arrow
>indicating
> > "In" and another indicating "Out." I note also that the lug with a #1
>is
> > labeled "LINE," while the lug numbered #2 has no other marking.
> >
> > Are these things polarized? Does the "LINE" lug go to the +13.8VDC
>source
> > and the non-LINE go to the positive terminal on the rig?
> >
> > Thanks for any clues.
> >
> > Bernie K5XS
************************************** See what's free at http://www.aol.com.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|