I couldn't agree more Mark documentation on any mods is VERY important.
As has been mentioned on this reflector, I was a former owner of this
particular rig (2nd owner) and I did silence the relay. I lifted a resistor
feeding the relay coil. Prior to selling the rig I soldered the resistor
back in place returning the relay to it's original configuration.
It has been through other hands since it left Canada in December 2005. So
just for the record - I didn't "block the relay".
73,
Rick
VE7TK
Website: http://www3.telus.net/ve7tk
---------------------
Subject: [TenTec] AL-811 amp integration with Omni V
From: k8vf_mark@centurytel.net
Date: Mon, 6 Aug 2007 22:29:58 -0400
Ah HA!
The old "blocked relay" trick....
A suggestion:
When we modify our rigs, guys and gals, how about documenting it some where
in the manual, like on a fly sheet.
Remember, you wont be around forever.
I am glad you found the problem.
Mark,K8VF
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|