TenTec
[Top] [All Lists]

Re: [TenTec] rtty

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] rtty
From: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 21 Nov 2007 18:01:08 -0600
List-post: <mailto:tentec@contesting.com>
FSK TX Date can be selected as Mark High or Mark Low.  This MENU item then 
specifies the logic voltage of the command.

73
Bob, K4TAX


----- Original Message ----- 
From: "Duane Calvin" <ac5aa1@gmail.com>
To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Sent: Wednesday, November 21, 2007 5:11 PM
Subject: Re: [TenTec] rtty


> Dave,
> What "normal/reverse" are you describing?
>
> 73, Duane
>
>
> Duane Calvin, AC5AA
> Austin, Texas
> www.ac5aa.com
>
>
> -----Original Message-----
> From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
> On Behalf Of David W LeJeune, Sr
> Sent: Wednesday, November 21, 2007 4:37 PM
> To: 'Discussion of Ten-Tec Equipment'
> Subject: Re: [TenTec] rtty
>
> Hi, Folks
> I have had very good success running the Orion II on rtty.  I use a
> Rigblaster pro to key the FSK line and provide audio to the computer for
> MMTTY.  MMTTY with the EXTFSK 1.05 MMTTY plugin does a great job of
> providing FSK keying for the Orion II.  I use the FSK mode on the Orion II
> with bandwidth set to 750.  Only real problem is to remember whether to 
> set
> the normal/reverse to the right setting on the Orion II.
>
> Dave K5WNV
>
>
> -----Original Message-----
> From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
> On Behalf Of John
> Sent: Wednesday, November 21, 2007 12:31 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] rtty
>
> Good question Steve I am in the same boat as you are I have the Orion II 
> and
>
> would like to work rtty but have no success doing so .  John kb2huk
> ----- Original Message ----- 
> From: <W1dxh@aol.com>
> To: <tentec@contesting.com>
> Sent: Tuesday, November 20, 2007 9:40 PM
> Subject: [TenTec] rtty
>
>
>> what is the best way of using the orion for rtty? cabling soundcard 
>> etc.
>
>> i
>> have the  aea pk 232. should i use it or do something  different. any and
>> all
>> info appreciated, this will be a new mode for me.
>>
>> 73's tnx,
>> steve  w1dxh
>>
>>
>>
>> **************************************Check out AOL's list of 2007's
>> hottest
>> products.
>> (http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>