Vincent:
If you will look on page 52 of your manual it will tell you that the
Headphone Output is designed for 16 - 32 ohms impedance . Also that they are
stereo, page 10. I have been using the Heil ProHeadset Plus with no
problems. Gene
----- Original Message -----
From: "Vincent Sgroi" <k1rm@sbcglobal.net>
To: <tentec@contesting.com>
Sent: Tuesday, January 15, 2008 10:00 AM
Subject: [TenTec] Heil headphones
> Does anyone have a method that matches the output of the Orion 2 to the
> Heil Pro set earphones. I believe the O2 has a 600 ohm output and the
> headset is 8 ohms. I tried using two of radio shack 1000ohm to 8 ohm
> audio transformers, but that didn't seem to work, unless I did something
> wrong. I used two to try to use the stereo feature of the O2. I have
> the rf mod in also.
>
> I don't like unplugging the earphones and having the audio blast into
> the room when I forget to turn down the audio gain.
>
> Any help would be appreciated.
>
> Vin, K1RM
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|