I don't have the internal tuner and don't have a 6 M amp.
If the 6 M amp has a respectable input impedance near 50 ohms, then there
should be no problem. The Omni VII PA works well with SWR of 3:1 or less.
That's a pretty wide range.
73
Bob K4TAX
----- Original Message -----
From: <W0WOI@aol.com>
To: <tentec@contesting.com>
Sent: Monday, January 21, 2008 4:07 PM
Subject: Re: [TenTec] Omni VII on 50 mHz
>
> In a message dated 1/21/2008 3:18:38 P.M. Central Standard Time,
> RMcGraw@Blomand.net writes:
>
> I've used a series of DownEast Microwave transverters {144 MHz & 432 MHz}
> with my Omni VI Plus and now with my Omni VII with a great degree of
> success. I can hear 2M signals off of the moon with a single 10 ele yagi
> and the DEM without a mast mounted preamp. That speaks well for the
> performance of the DEM transverters and the Omni series of receivers as
> the
> 10 meter IF.
>
>
>
> Bob, thanks for that info.
>
> A question about your Omni VII .... has there been an issue using it to
> drive a 6-meter amp inasmuch as the ATU doesn't function on 6 meters.
>
> 73.
>
> Bill, W0WOI
>
> (My six meter amp is an entirely rebuilt for six only Heath SB-1000.)
>
>
>
> **************Start the year off right. Easy ways to stay in shape.
> http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|