Re: [TenTec] Omni VI Keyer

[Ken Brown <ken.d.brown@hawaiiantel.net>]

Hi Peter,

Thanks for the information. It does work on my Omni VI version 3. I 
usually use a Logikey K-3, so seldom make any adjustments to the 
internal keyer. Nice to know about this feature though.
DE N6KB
> Assuming that the Option III is very similar to the Plus, press the st button in the upper right 
> hand corner of the front panel.  Then press the cw button.  when both are depressed the upper right 
> part of the dial, to the right of the frequency readout, will show the internal keyer speed.  Below 
> that is what I call weight, with 1.00 being "normal" and something above that being 
> progressively "heavier."
>
>