There's a mod on the Tentec wiki site that addresses this issue.
http://www.tentecwiki.org/doku.php
73
Bob, K4TAX
----- Original Message -----
From: <Hamdriver66@aol.com>
To: <tentec@contesting.com>
Sent: Sunday, February 17, 2008 4:32 PM
Subject: [TenTec] Omni VI Keyer
I recently acquired an Omni VI, with upgrade one and have developed a
problem with the internal keyer. I Have read the posts about slight
variations in
keyer speed and how to modify to correct. However, my keyer has begun
taking
extreme excursions in speed, like from less than ten wpm to probably near
forty wpm.
The keyer speed readout just flickers and will not give any meaningful
speed
reading.
Wondering if anyone has experienced this condition, and what could be the
cause?
Thanks,
Mike K4KJC
**************Ideas to please picky eaters. Watch video on AOL Living.
(http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy/
2050827?NCID=aolcmp00300000002598)
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|