To the contrary, I use the supplied Tentec cables, with added connector
gender and type adaptors, between the sound card and the Omni VII very
successfully for RTTY and PSK-31. Since both devices have Line Inputs and
Line Outputs the levels and impedances match quite well. Adjustments in the
Omni VII and the soundcard Mixer adjustments handle any needed level
adjustments with out any extreme maximum or minimum settings. Thus no
transformers, no pots, no attenuators needed.
I see no reason this approach would not work with the Jupiter.
73
Bob, K4TAX
----- Original Message -----
From: "Henry Mackey" <kb9cqo@embarqmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Monday, February 18, 2008 9:36 PM
Subject: Re: [TenTec] Ten Tec Jupiter on PSK31
Rick,
No. I have heard, but not knowing, that this is not a good idea. So to
appease myself I purchased from Donner Digital an interface, plugged it in
and away I went. Well wasn't quite that easy, but that is what I've been
using since about January of 04.
73 de Henry/n9hm
----- Original Message -----
From: wo8l@aol.com
To: tentec@contesting.com
Sent: Sunday, February 17, 2008 4:47:58 PM (GMT-0500) America/New_York
Subject: [TenTec] Ten Tec Jupiter on PSK31
Anybody using the Jupiter on PSK with just the Ten Tec supplied chord
directly to the computer sound card with no TNC?
Does this really work?? What settings on the rig are appropriate?
Thanks,
Rick
WO8L
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|