Oh no. Never run FULL OUT in PSK. About 30 watts from a 100 watt radio is
about right. Run the computer sound card, line input and line output
direct to the line in and line out connectors on the Omni V. Set the VOX
delay for minimum, adjust the VOX sensitivity to max, adjust the sound card
level to trip the VOX and adjust the mike gain for about 30 to 35 watts
output. That's about as complex as it gets.
73
Bob, K4TAX
----- Original Message -----
From: "Allan Taylor" <k7gt.cw@gmail.com>
To: <tentec@contesting.com>
Sent: Sunday, March 16, 2008 9:25 AM
Subject: [TenTec] OmniV and PSK31 -- any experience to be shared??
My backup Tentec rig is an OmniV. After my OmniVI returns from factory
service and frees up the V, it (the OmniV)
will be used for PSK31. I am absolutely inexperienced with PSK and
would greatly appreciate shared experience and
issues that may arise when using the V for PSK. I will be adding the
TT fan kit to allow running 'full out' in PSK.
--
73 Allan K7GT
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|