I was having a similar problem with DX4WIN. The blue screen of death
referenced a DLL file that I was able to track down to the driver for my
Byterunner serial card. I switched to a USB>serial adapter and haven't
had a problem since then. Apparently DX4WIN didn't like the driver for
the Byterunner card. Could be something similar with Logic.
73,
Alan N5NA
http://www.tentecwiki.org
NZ8J wrote:
> Thought I check here on a long shot that maybe someone else may have
> experienced the same problem. When I use the rig interface option in
> Logic 8 to interface with my Orion II it causes a "blue screen"
> periodically. I can use other control programs with the Orion II with
> no problem and I and use Logic 8 with other radios with no problems. I
> have emailed PDA about this but thought I would check here on the off
> chance someone else uses the same setup.
>
> If you use Logic 8 and an Orion II I'd like to hear from you..
>
> Please email: nz8j@woh.rr.com
>
> Thanks
> Tim
> NZ8J
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|