Hi Aaron!
Is the transmitter hooked up? Could you be getting RF into it?
Hit the dit or dah and then uplug the key to see if it stops.
Take care
Gary
---- Aaron Lamb <wm.aaron.lamb@gmail.com> wrote:
> I am trying to get my KR-50 to start working correctly after many years of
> neglect. Since I have unpacked all my HF gear after a 1100 mile move and 3
> years in the garage my KR-50 has decided to act up. It powers on and works
> but as soon as I hit a dit or a dah it keeps on going and will not stop nor
> switch from one to the other. Whatever the first paddle I hit is the one
> that keeps on going. I've taken the whole thing apart and put it back
> together, the mechanical portion of the keyer is fine and is not shorted out
> either. I would seem to be an issue on the keyer pcb but I don't really
> know where to start looking.
>
>
>
> I thought I would throw this one out to see if anyone may have some insight
> on this issue.
>
>
>
> Thank you,
>
> Aaron Lamb
>
> KD4GSL
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|