TenTec
[Top] [All Lists]

Re: [TenTec] Off Topic - Millen Grid Dip Meter Manual needed Model 90652

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Off Topic - Millen Grid Dip Meter Manual needed Model 90652
From: "K9RBorowski" <K9RB@bellsouth.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 5 Nov 2008 19:58:51 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
The difference between the two Millen GDO;s are numerous while the operation 
and
external appearances are nearly identical. The 90651 runs off 120 VAC and 
uses a
tube and associated power supply internally to accommodate the requirements 
of the
electron tube. The 90652 is fully transistorized and runs on a standard 9 
volt battery.
Besides the A.C. Power cord on the older 90651, they are identical 
externally. The
newer, solid state 90652 is quite a bit more stabile and being self 
contained, is more
convenient to use. As Carter states, the operating part of the manuals are 
virtually the
same but the internal circuitry is significantly different. The plug in 
coils are identical
for both models as is the external physical case dimensions, color, meter, 
etc.
73, Rog-K9RB


----- Original Message ----- 
From: "Carter" <k8vt@ameritech.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Tuesday, November 04, 2008 5:45 PM
Subject: Re: [TenTec] Off Topic - Millen Grid Dip Meter Manual needed Model 
90652


> Bill Mellema wrote:
>>  Ron:
>>
>>  Thanks for the response..the BAMA link is not working...I have the
>>  schematic...just need the operation manual...
>
> Bill,
> Several comments:
>
> 1)Many times, the BAMA main site appears not to work. This is because
> they can only accommodate a very few users at one time. This is why they
> set up a mirror site.
>
> Go to the BAMA main page; this should always work. Scroll down to
> "Edebris" (cute name!) -mirror- site. Click on it or go directly to:
>
> http://bama.edebris.com/manuals/
>
> This site virtually always works.
>
> 2) Go to "millen"; then choose "90651". I am not sure how this differs
> from the 90652 you are looking for.
>
> 3) The 90651 info contains the schematic AND the operating instructions.
> As another poster has stated, the "operating" part of the manual should
> be virtually identical to that of the 90652.
>
> Good luck!
> Carter,  K8VT
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>