Can't speak for the Orion but as to the Omni VII, there is a hardware gain
that may need to be adjusted. If your DSP mike gain is running at 30% or
less then I suggest that you reduce the hardware gain. Good and healthy DSP
mike gain value is in the 30% to 50% range. If you should overdrive the
input stage, pre DSP gain, then any distortion generated in the 1st stage
will be passed along and no amount or reducing the DSP gain will clear the
distortion.
73
Bob, K4TAX
----- Original Message -----
From: "Mark DeBord " <markinkpt@hotmail.com>
To: <tentec@contesting.com>
Sent: Monday, January 12, 2009 9:51 AM
Subject: Re: [TenTec] O2 - SSB distortion
Check the mic gain. The Orions, Omni VII, and Jupiter will overdrive and
it sounds exactly like RF. Your ALC should only flicker on some words.
Check the menu to make sure the menu mic boost was not accidentally
increased.
Mark ka4ick
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|