TenTec
[Top] [All Lists]

Re: [TenTec] poor audio on OMNI-V

To: tentec@contesting.com
Subject: Re: [TenTec] poor audio on OMNI-V
From: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
Reply-to: geraldj@storm.weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 29 Mar 2009 08:58:15 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On Sun, 2009-03-29 at 09:30 -0400, Carter wrote:
> yash@aol.com wrote:
> >  ?? I talked to the guy I just bought the OMNI-V from. His story is
> >  this. He operates 99% of the time? cw on 80. He decided to go to 17
> >  ssb one day and found the problem I have ,very distorted audio
> 
> Sorry, I tuned in late and missed most of the correspondence on this 
> issue, so pardon me if it has already been addressed...
> 
> ..but just going by the very simple, one sentence description of the 
> problem above, are you sure that it is not RF getting into the radio on SSB?
> 
> Have you tried it into a dummy load to see if the problem goes away? 
> Possibly the dreaded "pin 1" issue?
> 
> Good luck!
> 
> Carter  K8VT
> 
> 
Sounds bad on receive.

73, Jerry, K0CQ

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>