Depending on band conditions and antenna efficiency {not antenna gain}, a RF
Gain value of 60 may be too high. With a 1/2 wave resonant antenna on 160M
and 75M and to some extent, I run the RF gain in the 30's. On 10M & 12M
more RF gain is required due to the fact the antenna captures less signal.
73
Bob, K4TAX
>
> From: dl2rdh@aol.com
> Subject: [TenTec] Noise and ORION II
> To: TenTec@contesting.com
> Message-ID: <8CB95F0BD9837B2-9CC-315B@webmail-dh06.sysops.aol.com>
> Content-Type: text/plain; charset="us-ascii"
>
>
>> I find the NR of the ORION II poor. To my ear the noise of the Orion II
>> in SSB is very aggressiv and the NR ist unusable while not doing
>> much to reduce the noise. I am setting AGC and RFGain. I must
>> reduce the RF-Gain to "60", while the bands are too noisy. This is
>> my subjective opinion.
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|