TenTec
[Top] [All Lists]

Re: [TenTec] Argonaut II digital interfacing?

To: tentec@contesting.com
Subject: Re: [TenTec] Argonaut II digital interfacing?
From: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
Reply-to: geraldj@storm.weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 08 May 2009 15:09:45 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On Sat, 2009-05-09 at 11:15 +0000, Bill Rowlett wrote:
> It appears that this amp has been set up to "talk" to the newer line of rice 
> boxes like the FT-817 or the IC-703 etc.
> 
>  
> 
> If you can get a copy of the specs which give the programing of the device, 
> you can tell if it will talk to anything else.
> 
>  
> 
> 73 and good luck
> 
>  
> 
> Bill  KC4ATU
> 
>  
I believe the FT-817 has the same amp interface as the FT-857. The
interface on the FT-857 has 4 bit digital binary data for band and a
wire for PTT on an 8 pin mini din connector. I need to check for that on
the 817 one of these days.

73, Jerry, K0CQ

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>