There we go! Who out there is in need for a new backlighting panel for
their Delta/Argon rig?
BillHarris/w7kxb
--------------------------------------------------
From: "Paul Manning" <paul@glowsafe.com>
Sent: Saturday, January 16, 2010 9:20 AM
To: "'Bill Harris'" <w7kxb@msn.com>
Subject: RE: [TenTec] Restoring backlighting for the Delta II or Its
Argo,brother???
Thanks Bill. By the way, I give discounts for multiple purchases and it
also means the delivery costs can be shared.
Cheers,
Paul
-----Original Message-----
From: Bill Harris [mailto:w7kxb@msn.com]
Sent: 16 January 2010 16:53
To: Paul Manning
Cc: tentec
Subject: Re: [TenTec] Restoring backlighting for the Delta II or Its
Argo,brother???
Thanks Paul. I'll pass this on to the TenTec users group. There's a good
chance Glow Safe will hear from a few Delta/Argon users. Cheers,
Bill Harris
--------------------------------------------------
From: "Paul Manning" <paul@glowsafe.com>
Sent: Saturday, January 16, 2010 2:58 AM
To: "'Bill Harris'" <w7kxb@msn.com>
Subject: RE: [TenTec] Restoring backlighting for the Delta II or Its
Argo,brother???
Hi Bill,
You can find details of the panels here:
http://tinyurl.com/TenTecDeltaII
Cheers,
Paul
-----Original Message-----
From: Bill Harris [mailto:w7kxb@msn.com]
Sent: 15 January 2010 19:48
To: Discussion of Ten-Tec Equipment
Cc: paul@glowsafe.com
Subject: Re: [TenTec] Restoring backlighting for the Delta II or Its
Argo,brother???
Bob:
Do you, by any chance, remember what the Glowsafe part number was?
Regards
Bill Harris/w7kxb
--------------------------------------------------
From: "Bob Towers" <mm0rkt@gmx.com>
Sent: Thursday, January 14, 2010 7:38 AM
To: <tentec@contesting.com>
Subject: [TenTec] Restoring backlighting for the Delta II or Its
Argo,brother???
I did it about 2 years ago and I sold my Argonaut II afterwards (I
had too may HF rigs and had just built a K2). The panel in my
Argonaut wasn't
broken: I just thought it could have been improved with a new panel -
which it was!
At the time I was in contact with Glowsafe in the UK and Paul Manning
there, who developed an EL panel for the Argonaut. As far as I know
he may
still have some stock left.
73
Bob
MM0RKT
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|