Re: [TenTec] Omni 6 plus chirp on 30 meters

["Malcolm McLeman" <malcolm.mcleman@free.fr>]

Mci bcp yrs below Walt.
Like many, I've never owned a rig from new and have never bought using the 
original price tag as a parameter.
My Corsair-1 I bought because I heard it on the air, cw qso G3KQS to 
TA2/G3UIN and was hooked immediately by its outstanding  cw note.
Eric/G3KQS (sk) eventually sold the rig to me with a duff PA..
I have to admit opening the lid and seeing TT's construction practice for 
the first time I was rather taken aback!
Replaced the final trannies and bingo never looked back till I moved on to 
the Corsair2 which is still my shack work-horse.
Why my JST135 choice?
At that time, and also introduced to me by G3KQS, I was into HAL Corp's 
Clover.
The 135 was the only rock solid synthesised rig that came anywhere near the 
Corsair's superb  receive sensitivity.
I still have fun today comparing the two when working DX.
73 de Malcolm/F5VBU


----- Original Message ----- 
From: "Walt K8CV" <waltk8cv4612amos@att.net>
To: "'Malcolm McLeman'" <malcolm.mcleman@free.fr>
Sent: Thursday, February 25, 2010 10:35 PM
Subject: RE: [TenTec] Omni 6 plus chirp on 30 meters


> Ah, Measurer Malcolm:
>
> I have an Omni-6 option 3 ( which supposedly turned it into a Omni-6+ )
> upgrade and none of my non DSP radios, Japanese or whatever, have ever 
> been
> upgraded to the next model or for such a reasonable price!
>
> But wait, I am not only a TenTec fan! By the way, I think the old Omni for
> what I do, cw, is one of the better rigs around! But I digress, the Orion 
> 2
> that I have still uses the same software that came with it and I did not
> participate in the BATA test software fiasco at TenTec and maybe now that
> some person named John Henry is back things will change? Never had chirp 
> on
> the Omni 6 either, but did have the display go blank problem and they and
> the guys on the reflector recommended a change in the zener diode there 
> and
> I did that but put in a higher wattage one and no more display problems.
>
> I looked long and hard at the JST135 and must have read the review in QST
> and decided it was not for me. Never had a Collins 380 either :-), to
> expensive for me, but did have a Drake TR-7, which my son now uses.
> Interesting radio for it's time, and built like a battle ship! But, alas,
> not the most sensitive beast, but almost as bullet proof as the roofing
> filter rigs of today!
>
> Have you tried the Yaesu FT-950? Or even the lowly FT-450? Absolutely
> amazing radios for the PRICE!
>
> Walt K8CV
>
> -----Original Message-----
> From: Malcolm McLeman [mailto:malcolm.mcleman@free.fr]
> Sent: Thursday, February 25, 2010 1:41 PM
> To: Walt Amos
> Subject: Re: [TenTec] Omni 6 plus chirp on 30 meters
>
>
> Perhaps I should have said the second hand price arena looking recently at
> $675 for Corsair2 plus VFO as an example.
> My input was not intended to evoke an "us and them" scenario or digress 
> into
> the world of car manufacture but now you mention it my trusty 1983 (GM) 
> Opel
> Ascona
> is still running on it's original Koyo wheel bearings.
> Due to the fact my Corsair is not stable enough for PSK31 my second rig is 
> a
> JRC JST135, slated by QST on its debut and not necessarily everyones cup 
> of
> tea, I find as solid as a rock.
> I think Ten Tec are very lucky to have such a faithful following, myself 
> one
> of them.
> My point was very expensive rigs whatever their origin that chirp require
> constant tweaking or (and only what I read) in the case of the Orion
> unfulfilled software I find unacceptable.
> 73
> Malcolm F5VBU
>
>
>
> ----- Original Message ----- 
> From: "Walt Amos" <waltk8cv4612amos@att.net>
> To: "Malcolm McLeman" <malcolm.mcleman@free.fr>
> Sent: Thursday, February 25, 2010 7:00 PM
> Subject: Re: [TenTec] Omni 6 plus chirp on 30 meters
>
>
> > First off, they are not in the same price range, the OMNI, even new was
> > half the cost of the other ones you mention. Secondly, all, and let me 
> > say
> > that again, ALL , radio equipment have / has problems! The first YAESU
> > FT-1000MP I go worked for about 20 seconds and then went DEAD! The dealer
> > actually had to talk to YAESU to get permission for me to send it back,
> > Chip Margelli was the CEO then and gave them permission. The second one
> > worked fine for many years but now the RIT control is malfunctioning and
> > probably just a dirty plug on what ever board it is connected to and will
> > eventually get around to opening it up and fixing it! Kenwood is now
> > almost out of business because of the rotten rice boards and the plated
> > through hole going open! Look at the problems TOYOTA is having and 
> > KILLING
> > PEOPLE ! You can't believe in any STUFF ...............
> >
> > :-)
> >
> > Walt K8CV Royal Oak, MI.
> >
> >
> > ----- Original Message ----- 
> > From: "Malcolm McLeman" <malcolm.mcleman@free.fr>
> > To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> > Sent: Thursday, February 25, 2010 12:47 PM
> > Subject: Re: [TenTec] Omni 6 plus chirp on 30 meters
> >
> >
> > > As I almost went down the Omni 6 plus road do I read correctly that a
> > > modern
> > > transceiver competing in the same price arena as the Icom Pro or the FT
> > > 1K
> > > series not only chirps but requires regular tweaking?
> > > 73 Malcolm F5VBU
> > >
> > > ----- Original Message ----- 
> > > From: "donhall161" <donhall161@sbcglobal.net>
> > > To: <ken.d.brown@hawaiiantel.net>; "Discussion of Ten-Tec Equipment"
> > > <tentec@contesting.com>
> > > Sent: Thursday, February 25, 2010 2:57 PM
> > > Subject: Re: [TenTec] Omni 6 plus chirp on 30 meters
> > >
> > >
> > > > Did that and check again regularly.
> > > >
> > > >
> > > > 73  Don K5AQ
> > > > _______________________________________________
> > > > TenTec mailing list
> > > > TenTec@contesting.com
> > > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec