Chas,
Changing the "ANN" function under hidden menu #1 from "ALL" to "OFF" did
the trick. This is the annunciation beep function that causes the unit
to emit a short beep when any of the front-panel keypad buttons are
depressed. Thankfully this appears to be totally independent of the CW
sidetone volume setting. I had a long QSO on SSB Sunday afternoon after
making the change and I had no problems with the intermittent beeping in
my headphones while I was transmitting.
Thanks for your help, Chas.
73, Mike W4EF/6.......................
On 4/1/2010 3:41 PM, Michael Tope wrote:
> On 4/1/2010 2:46 PM, Charles W. Shaw wrote:
>
>> Mike, W4EF wrote:
>>
>>
>>> I nominate my 12 gauge pump that I am going to use to shoot my POS Omni
>>> 6+ next time it starts randomly beeping on SSB :-)
>>>
>>>
>> Mike and others,
>> My Omni VI has a place in the #1 User Menu which allows
>> turning OFF the 10 minute ID reminder beep, and also another beep signal.
>> Will that help, Mike?
>>
>> Charles - N5UL
>>
>>
> I'll give that a try next time I am up at the remote site, Charles.
> Worst-case I suppose I can get into the schematic and figure out some
> way to mute the audio output during SSB transmissions. I prefer having
> an SSB monitor function as with my FT1000MP MK V, but I can live with
> the silence of no monitor function. It's that incessant beeping that
> comes and goes randomly that makes me want to shoot the rig.
>
> 73, Mike W4EF/6
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|