Ron,
I have a K2 that I built about 3 years ago. At the time, I also had a
Jupiter. After using the K2 for a while, I was dissatisfied with the
Jupe and traded for an Omni Vi opt 3. In comparing the 2, the Elecraft
is every bit as good as the Omni VI. The only down side is the 12
watts vs. 100. The Elecraft list is a great resource and easily linked
from the Elecraft site. You can get an idea what they are worth in
dollars in order to compare it to the Kenwood. You may find the 100
watt option module for sale or look for a small amp.
Good like with your decision.
Phil N3ZP
On Apr 17, 2010, at 5:20 PM, Ron Notarius W3WN wrote:
If I can interrupt, for a moment, our monthly tirades for and
against Orion
firmware...
I'd like to solicit some opinions. (I hope I don't live to regret
that!)
And it actually is somewhat reflector related...
As some of you know, I won a Kenwood TS-480SAT at a hamfest not
quite two
years ago. Well, I find myself using my Corsair II more than the
Kenwood,
so I put an ad a few days ago on QTH.COM seeking a trade for something
comparable, in terms of both technology and age (and what I'm
comfortable
with), namely an Omni VI or VI+ (or VI with Options installed...
whatever).
Just the rig, I don't need the PS as I already have one, courtesy of
my
friend Bill W3WH.
I've had a few offers to date, one or two of which are intriguing.
(One wag
actually asked if I'd consider a "good classic" rig -- an ancient
FT-101.
Uh, no.)
One offer was to swap the Kenwood for an Elecraft K2/10.
I'm intrigued, as I know Elecraft's reputation is almost as good as
Ten-Tec's (please no emails if you disagree!). But I know nothing
of this
particular rig, if it's had any options (such as 160) installed...
and the
thought of dropping to a QRP rig is not of great interest right now.
Nothing against QRP, but I did a few years of that with my old Atlas
110,
and going back to that on a regular basis?
OTOH, it is an Elecraft. And if I ever came up with a spare $400 or
so, I
could upgrade to the 100 W output.
So... those of you familiar with the rig, what do you think? Is
this a
trade I should pursue, or should I stay "on course" and try and find
an Omni
VI?
73, ron w3wn
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|