Re: [TenTec] Orion II 15 m CW Transmit Power Fluctuation

[Richards <jruing@ameritech.net>]

I forgot to mention that the dummy load is beyond the switch box
in my previous post example.

============================ JR =========================

On 4/29/2010 1:44 AM, Jim Brown K9YC wrote:
> On Thu, 29 Apr 2010 01:29:12 -0400, Richards wrote:
>
> > IF IT IS RF in the shack ... then it MIGHT show up
> > even when using the dummy load.
> No, it should not as long as the shield of the coax goes to the
> chassis and the coax is not trash. And so far, I've not seen the main
> output connector on a ham rig that didn't straight go to the chassis.
>
> 7