Yes, I had this problem yesterday...turned out to be a faulty ACC 1
cord....after re-setting it all worked well.
73- eric w7nnn
> To: tentec@contesting.com
> From: f8ehj@free.fr
> Date: Sun, 8 Aug 2010 16:41:05 +0200
> Subject: [TenTec] Jupiter 538 always on transmit
>
> Hello,
>
> After a long time without radio operating (about 6 months), I wished
> to turn on my tansceiver Jupiter 538.
> When I powered on, the TT jupiter is always transmiting on Ham radio
> Band.
> I test all modes, bands, it is like the PTT or CW key are pushed.
> I performed a master reset (A CONTROL KEY PUSHED and POWER SWITCH
> TURNED ON) and downloaded lastest firmware version (1.32) without
> success.
> I tested with schematic help the input signals CW KEY (from jack on
> front panel) and PTT (from ACC1). They are no short circuited.
>
> Did anyone have this problem ?
>
> Best 73's
>
> Herve F8EHJ
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|