I totally agree with Andre, my OII was my 70th birthday present to me and I
find the radio a benchmark for all other AR radios. The RX's are fantastic.
Originally set up with 2.039d I experimented with the other versions that
were available, they were interesting but not the whole deal. I find the
current version, since John Henry returned to be a good replacement for
2.039d.
Yes some mod's could be made but this is a personal thing. I don't have a
personal programmer to modify the software to my personal needs. My QTH is
in a reasonably quiet area so I have little need of the NR,NB etc, maybe
this will change when 'Ol Sol gets out of bed.
If you don't like your OII, send her over here I'm sure I could find
another job for it.
John de VK2XGJ
Sometimes I act normal, but I get bored,
so I just go back to being me!
----- Original Message -----
From: "Andre021" <andre121@t-online.de>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Monday, August 23, 2010 08:47
Subject: Re: [TenTec] Orion II firmware
Hello all,
i am an satisfied ORION II user. I have had many trouble to understand and
to use my OII. But after two years of learning I don´t wan´t to have an
other TRX. A long time I was "fan" of japaneise Transceivers. They looking
so nice, but thats not all. OK. the building quality of the OII is not the
best, especiality the tuning knobs and the display is not so good, comparing
with Icom TRX ore so. The receiver performance is the important think for me
and there is the OII the number one for me. I think the japaneise companies
have learned from TEN TEC especially with roofing filters and so on. I think
we don´t need an ORION III. What we need is a stable software fore the OII
and more updates to remove all the problems.
´73 André DL2AVC
----- Original Message -----
From: <Rsoifer@aol.com>
To: <tentec@contesting.com>; <waltk8cv4612amos@att.net>
Sent: Monday, August 23, 2010 12:09 AM
Subject: Re: [TenTec] Orion II firmware
> T-T had a display fast enough to be really useful as an operating aid.
> It
> was the waterfall display in 2.041XT. Yes, it looked kinda washed out on
> SSB, but I'm mainly a CW op and it was a real help. It was about twice
> as
> fast as the spectrum sweep display in 2.044A. John Henry said that
> they're
> working on a new version, which I'm eagerly awaiting. Meanwhile, the
> sweep display in 2.044A is definitely an improvement over 2.039d.
>
> I don't think we need an Orion III, just more work on the O II firmware.
> Keep up the good work, John. It's helping.
>
> 73 Ray W2RS
>
>
>
> In a message dated 8/22/2010 9:32:09 P.M. GMT Standard Time,
> cdistflatfoot@gmail.com writes:
>
> I will acknowledge that the sweep is slow . I think the sweep should
> be better than the other guys . I use the sweep and when I operate at a
> different qth I find myself looking for it . I am looking foreword to
> the whole package coming together in the Orion III . I am getting bored
> with this Old Orion II give us some good news TT and tell us you are
> working on a new radio to replace the Orion . John kb2huk
> On 8/22/2010 4:25 PM, Walt Amos wrote:
>> Ah, Yes, will the Orion III have a separate 32bit DSP receiver for the
>> sweep, Wahoo how important is that ? Will it have a second receiver of
> the
>> same quality as the main receiver ? Wahoo, how important is that ? I,
> alas,
>> use 2.039d and am thrilled with it so far, but I don't use the dumb
> sweep at
>> all. Can probably count on two hands the times I have used the second
>> receiver!
>>
>> Would you say " I AM A HAPPY CAMPER ? ".
>>
>> Walt K8CV Royal Oak, MI.
>>
>>
>> ----- Original Message -----
>> From:<Rsoifer@aol.com>
>> To:<tentec@contesting.com>
>> Sent: Sunday, August 22, 2010 1:59 PM
>> Subject: Re: [TenTec] Orion II firmware
>>
>>
>>> It may be subjective, but I like the NR in 2.044A a lot better than the
>>> one
>>> in 2.039d. The sweep display seems faster too, which makes it more
>>> useful. Or, am I just imagining it?
>>>
>>> 73 Ray W2RS
>>>
>>>
>>> In a message dated 8/22/2010 5:07:18 P.M. GMT Standard Time,
>>> gpalfe@comcast.net writes:
>>>
>>> I am running version 2.039d on my Orion II.
>>>
>>> I am wondering if the latest 2.44 firmware offers any real
>>> enhancements
>>> over 2.039d. I wonder if it is worth the time, hassle and possible
>>> trade-offs to upgrade to 2.44. It is a larger project here in that
> for
>>> security
>>> reasons my shop does not run Windows so I have more work to get and
>>> run
>>> the
>>> upgrade.
>>>
>>> Thanks for any insight.
>>>
>>> Greg, wa0bnx
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.851 / Virus Database: 271.1.1/3088 - Release Date: 08/23/10
04:35:00
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|