I also want to chime in with a sincere "Thanks! and well done!" for
the work you and your staff have done on the Orion and Orion II
firmware (I have the Orion II).
As for the waterfall display on the Orion, it would work if and only
if the display can handle shades of gray. If that's not possible,
then the waterfall display won't work.
Keep up the good work!
Kim Elmore N5OP
At 07:48 AM 2/21/2011, Henry, John wrote:
>Hello Dean,
>
>The latest updates of the Orion and Orion II both utilize the RF AGC
>system. It was the first utilized in both rigs before we added the
>capability to select between the AF AGC or RF AGC. Just a note, all
>other TenTec radios, 588, 538, 599, etc utilize the RF AGC system.
>
>Just a reminder for many:
>AF AGC.
>It did not permit the use of many of the DSP functions, e.g. auto
>notch, and had a lot of negative side effects that would require quite
>a bit more horsepower to resolve. Or at least quite a bit more work to
>make AF AGC and the other DSP receiver enhancement functions to work
>properly. The real reason it was created, we will look to see how we
>can provide that featuring without having to select from two different
>times at which AGC processing occurs.
>
>The Waterfall Display.
>For the moment, it was pulled out of the latest Orion and Orion II
>releases so that we could get the both firmware sets to a very stable
>and usable frame to build upon.
>
>We do intend on bringing the waterfall display back for the Orion II
>once the firmware has been used for a while and its real stability
>determined. Not really sure it could be visibly useful on an
>monochrome Orion 565.
>
>Thanks,
>John Henry
>TenTec Engineering
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|