Usually you adjust L near the LF end of the range and C at the high end,
when tuning is by variable capacitor. They interact so you have to move
back and forth several times.
73, Jerry, K0CQ
On 3/22/2011 5:25 PM, BUDW2GLN@aol.com wrote:
> I am working on a model 200 VFO.....I have installed new dial and band
> change cords....WHEW :-) and am in the process of trying to calibrate the
> master oscillator so that the unit will track end to end reasonably
> accurately...........
>
> I have the 200 instructions with print but do not have any other
> information at my disposal
>
> If anyone has a 200 and has attempted to do the accuracy alignment, I would
> appreciate some help. I just can't get it to track.......L1 and C1 are
> used to accomplish this but I'm not sure which is for which end ???
>
> Thanks
>
>
> Bud, W2GLN
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|