TenTec
[Top] [All Lists]

Re: [TenTec] Model 963 questions

To: tentec@contesting.com
Subject: Re: [TenTec] Model 963 questions
From: Stuart Rohre <rohre@arlut.utexas.edu>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 22 Sep 2011 18:51:49 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Astron does have some funny circuits.

I think it is the 35 amp supply that uses half of a bridge for a full 
wave rectifier, instead of a bridge.  In some other models maybe they do 
use a bridge as a bridge.

The RF sensitivity has not been observed on a couple of 35 Amp Astrons 
at Red Cross here.  These are on HF and VHF rigs.

Likely the mod that fixes things is a 0.01mf disk ceramic cap across the 
DC leads just inside the output terminal bolts.

The other point that should have a cap is the 3 terminal regulator. 
Look up data sheet sample circuits for the LM 317.

Some have reported the outer case joints not making good electrical 
contact, and removal of paint where they overlap helps.

Tightening all bolt connections especially; if the supply is moved 
around for Field Day, or portable uses, is a good thing to do from time 
to time.

Stuart Rohre
K5KVH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>