TenTec
[Top] [All Lists]

Re: [TenTec] Orion 565 S-meter adjustment

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Orion 565 S-meter adjustment
From: "jack" <jfriend31@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 27 Oct 2012 19:06:44 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I don't have 2. anything. still using the 1. software thus the idea does not work on my machines.
jack
ak7o


-----Original Message----- From: John Henry
Sent: Saturday, October 27, 2012 12:56 PM
To: Discussion of Ten-Tec Equipment
Subject: [TenTec] Orion 565 S-meter adjustment

I believe that this came in on firmware version 2.064x11
If you have at least that version, it should work.
Press Menu
Press RX
Press PWR
If you are running a V2 code prior to 2.064x11 or V1 code, then it will not
work.
Let me know what version of code you are running and I can verify here at
TenTec also...

Thanks, and 73
John Henry, KI4JPL
TenTec Engineering




565 of which I have 2,
jack
ak7o

-----Original Message-----
From: Barry N1EU
Sent: Saturday, October 27, 2012 3:20 AM
To: Discussion of Ten-Tec Equipment
Cc: Orion565
Subject: Re: [TenTec] Orion 565 S-meter adjustment

This adjustment process only works with the Orion 565, not the Orion II 566.

The procedure is also posted at
http://www.tentecwiki.org/doku.php?id=565  - scrolldown to
"Mods/Adjustments/Repairs"

73,
Barry N1EU

On Fri, Oct 26, 2012 at 9:45 PM, jack <jfriend31 at comcast.net> wrote:
Rick, when I do the steps noted in adjusting the S-meter, the 3rd step:
PUSH
PWR cancels everything and one is back to the normal screen. is there
something I am missing?
jack
ak7o


-----Original Message----- From: Rick W
Sent: Friday, October 26, 2012 3:31 PM
To: Ten-Tec Reflector ; Orion565
Subject: [TenTec] Orion 565 S-meter adjustment


The Orion (565) has a built in algorithm to adjust for difference between
the various types of S-meters used during production.

I have posted a description of this procedure on my website.

Please note that this procedure applies to the Orion (565) only.


73,
Rick
VE7TK


Website:  http://www.ve7tk.com
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>