TenTec
[Top] [All Lists]

Re: [TenTec] PTO lube shelf life...

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] PTO lube shelf life...
From: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 3 Aug 2013 20:54:44 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
PTFE is good stuff to have around. I think many of the big box hardware stores sells the Super Lube product.

73
Bob, K4TAX


----- Original Message ----- From: "Roger C. Rose" <rcrose@sbcglobal.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, August 03, 2013 8:49 PM
Subject: Re: [TenTec] PTO lube shelf life...


Jon,

I'll check that out, thanks. I'm looking forward to this rebuild like a trip to the proctologist so doing it right would please me greatly.

73,
Roger, W5LXS

k6jek wrote:
Roger,

I'd go with PTFE (teflon) based grease. I haven't re-built a Ten-Tec PTO but I have re-built boat anchor PTOs. Lithium grease dried up after a few years and became an anti-lubricant. I was puzzled by this. Then I re-built a pinball machine and hung out on those forums. Over there, lithium grease is famous for drying up and is avoided for that reason. I bought some ptfe grease online but have since seen it here and there. That's all I use now, teflon based grease and oils. The stuff I use is called Super Lube So far, it's been super. I bought mine on eBay but I think I saw some at the Home Despot the other day.

Good luck,

Jon

On Aug 3, 2013, at 4:38 PM, Roger C. Rose wrote:


Jim,

I don't think the grease Ten-Tec provides is anything special. I'm looking to doing the same thing soon and there is quite a discussion on greases on the TenTecWiki PTO rebuild section: http://www.tentecwiki.org/doku.php?id=pto I've about decided to go with white lithium grease as our local bike shop doesn't carry the others mentioned. See what you think.

73,
Roger, W5LXS

Jim Goudie wrote:

Hello,

Probably 10 years ago I purchased the PTO rebuild kit for my 544... but since the PTO continued to function, I never did the rebuild. It has been sitting on the shelf for a number of years now.

The green lube is still in the plastic bag and still squishy (forgive the technical term). Should I get new lubricant or go with the "old" stuff? Am I likely to find good 'grease' locally, or should I just contact Ten Tec?

Tnx & 73
Jim, AF3Z


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>