Thanks Guy's..I look at this tomorrow when I get back in the radio room..73s Bob
Bob Gibson W5RG
________________________________
From: Ted Bryant <w4nz@comcast.net>
To: 'Discussion of Ten-Tec Equipment' <tentec@contesting.com>
Sent: Sunday, August 11, 2013 8:01 PM
Subject: Re: [TenTec] pc to orion
Bob,
Do all the com port parameters in HRD (speed, parity, etc.) agree with the
parameters for the radio? (57600, 8-N-1, handshake, handshake)
Does the com port number in HRD agree with the port number on the computer?
The RS232 cable should be wired "straight", no pairs transposed.
Ted W4NZ
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Bob Gibson
Sent: Sunday, August 11, 2013 6:40 PM
To: TenTec@contesting.com
Subject: [TenTec] pc to orion
I'm having a hell of a time trying to get the Orion to connect to HRD...
I have a new cable..I have tried three different cables with no luck..any
ideas would sure help..Bob
Bob Gibson W5RG
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|