TenTec
[Top] [All Lists]

Re: [TenTec] Good Mike Technique

To: tentec@contesting.com
Subject: Re: [TenTec] Good Mike Technique
From: Jim Brown <k9yc@audiosystemsgroup.com>
Reply-to: k9yc@arrl.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 25 Feb 2014 14:23:20 -0800
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On 2/25/2014 2:02 PM, Bob McGraw - K4TAX wrote:
I can agree with Jim on this.

Proper use of compression {emphasis on "proper} does raise the average audio level. Excessive compression can cause a "pumping" sound.

Yes. In general, audible pumping is most often caused by bass content, which is another reason for rolling off the low end of TX audio in ham systems.

Compression with incorrect attack and release times, largely defined by the program content, can also make things better or worse. Compressors with automatic variable ratio attack and release times plus variable input to output ratios do a really nice job to hold the audio level up and do not artificially color the sound. The Teltronics LA-2A is a good example. Also the CBS Labs VolumeMax is another good one.

That's some pretty old iron, Bob. :) TX compression is done quite well in the Elecraft K3 and KX3, and I suspect Ten Tec stuff of recent vintage performs well. Although Al Kahn was a CW guy, he was one of the two founding partners of Electro Voice, and started Ten Tec with the proceeds from selling EV.

73, Jim K9YC

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>