John, if you're able to make a WAV recording with a soundcard off your
566's audio output, please record ten seconds of band noise at 2400hz
selectivity in USB with PBT at 0 and email it to me. I'll run the spectrum
on it and compare with my 566 and create a plot showing the two compared.
73, Barry N1EU
On Tue, Mar 25, 2014 at 7:56 PM, John Huffman <hjohnc@gmail.com> wrote:
> Carl -
>
> There's a menu adjustment to center the CW filters, but only 'Enable' for
> the 1.8kHz and there is no menu listing for anything broader.
>
> Now if there is something I can mess with with a screwdriver, I'm ready.
>
> Thanks, Carl.
>
> 73 de K1ESE
> John
>
>
> On 3/25/2014 3:44 PM, Carl Moreschi wrote:
>
>> I believe that is the exact point where the 2.4 hardware filter gets put
>> into the receive path. About 2.4 khz, it's not in the path. There's a
>> filter centering adjustment for each filter and that would allow you to
>> move the filter a little either way.
>>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|