TenTec
[Top] [All Lists]

[TenTec] Orion 2 SSB Filter Adj?

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>, orion565@yahoogroups.com
Subject: [TenTec] Orion 2 SSB Filter Adj?
From: John Huffman <hjohnc@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 25 Mar 2014 15:31:57 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
All -

I have a question on my Orion 2 - 566.

There seems to be a receive filter shift between an SSB bandwidth of 2.4 kHz and less and 2.410 kHz and more. This happens on both upper and lower sideband.

At 2.4 kHz the sound of SSB signals has more bass. At 2.410 kHz and higher there is less bass. I can get the bandwidths of 2.410 and higher to sound the same as the lower bandwidths by adjusting the Pass Band Tuning to - 200 hz.

Is there a filter in the receive path at 2.4kHz? Can it, or the next wider filter, be tuned or adjusted?

I have never experienced this on my Orion (1) - 565.

73 de K1ESE
John
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>