The beacon is operated by KD4NMI and is on 50.0600 mhz. It is currently
about 300 hz low. I am using a loop made by KD4NMI that is only 30' high.
Not too bad when band is open. Each Sunday night at about 2000 EDT, there
are a few of us locally that operate am on 50.400 mhz. We welcome anyone
that can hear us.
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of K8JHR
Sent: Sunday, July 13, 2014 10:09 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Orion II Firmware Ver3.033xd
The latest Orion II firmware works well at my station with no known issues.
Same for the latest Omni VII firmware.
I erected a 6 meter two-element parasitic array (Moxon) today... Can you
tell me what frequency the beacon is on and I see if I can hear it! If so,
I suppose I can reach YOU as well.
Happy trails.
-------------------------K8JHR ----------------------
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|